Multi-Factor Authentication (MFA)

Tom Aylett
Tom Aylett
  • Updated

Add an extra layer of security to protect your Mentorloop account

Note: MFA is only available for password authenticated users.

 

What is Multi-Factor Authentication?

Multi-Factor Authentication (MFA) provides an additional security layer for your Mentorloop account. After entering your password, you'll need to provide a time-based code from an authenticator app on your phone or computer. This means that even if someone obtains your password, they won't be able to access your account without also having access to your authenticator app.

 

Why Enable MFA?

Enhanced Security
Protect your account from unauthorised access, even if your password is compromised.
Data Protection
Keep your mentoring relationships and personal information secure.
Quick & Easy
Signing in with a code from your authenticator app takes just seconds.
Peace of Mind
Know that your mentoring data and connections are protected.

 

How to set up MFA

You'll set up MFA from the Set up multi-factor authentication (MFA) screen. You'll see it when you sign in if your program requires MFA, or you can open it yourself from your account settings. Setup takes about five minutes.

Before you start

  • Tried before? Delete every old Mentorloop entry first. Open your authenticator app and delete every entry called Mentorloop. Old entries will never work again, and it's easy to read a code from the wrong one.
  • Do it in one go. Finish all the steps on one device, in one sitting. Don't refresh the page, sign out, or open Mentorloop in another tab or browser until you're done. Each time the setup screen opens, it shows a new QR code, and codes from an earlier one won't work.

Step 1: Get a free authenticator app

An authenticator app makes a new 6-digit code every 30 seconds. You can use any app that supports time-based one-time passwords (TOTP). These are free:

Your device Free app Where to get it
iPhone or iPad Microsoft Authenticator or Google Authenticator App Store: Microsoft Authenticator or Google Authenticator. The Passwords app built into iOS 17 and later also works.
Android phone Google Authenticator or Microsoft Authenticator Google Play: Google Authenticator or Microsoft Authenticator.
Mac, without a phone Passwords app Built in to macOS 14 Sonoma and later. On an older Mac, install Ente Auth.
Windows PC, without a phone Ente Auth ente.io/auth. The free Authenticator browser extension for Chrome and Edge also works.

Looking for an app in an app store?

Some apps in search results look similar but ask for a subscription. You don't need to pay for anything. Use the links above, or look for the apps made by Google or Microsoft.

If you already use an authenticator app for work or another service, you can use that one. Mentorloop gets its own entry in the app, separate from your other accounts.

Step 2: Open the setup screen

If your program requires MFA, the setup screen appears after you sign in. Otherwise, click your profile picture in the top right corner of Mentorloop, click Account under Account settings, then click Add MFA.

If you can, open Mentorloop on a computer and use your phone for the authenticator app. Switching between apps on a phone can reload the page, which gives you a new QR code.

The Set up multi-factor authentication (MFA) screen, showing the QR code, the setup key, and the Authentication code box

Step 3: Add Mentorloop to your authenticator app

In your authenticator app, choose to add a new account. In Microsoft Authenticator, choose Other account. In the Mac Passwords app, create or open an entry for Mentorloop and choose Set Up Verification Code.

Then do one of these:

  • On a phone, scan the QR code on the Mentorloop screen. If it won't scan, zoom the web page in (hold Ctrl or Cmd and press + a few times), then try again.
  • On a computer, or if scanning doesn't work, use the setup key. Click the long key under the QR code to copy it, then paste it into your app. If you're typing it on a phone, choose Enter code manually (or similar) and type the key exactly as shown. If the app asks, the type is Time based and the code has 6 digits.

A new entry called Mentorloop appears in your app, showing a 6-digit code.

Step 4: Enter the code and click Enable

Type the 6-digit code from the new Mentorloop entry into the Authentication code box, then click Enable once.

You'll see a message that multi-factor authentication has been enabled, and you'll receive a confirmation email. From now on, you'll enter a code from this entry each time you sign in.

If Mentorloop says the code is invalid, see My code isn't working during setup below.

Logging in with MFA

Once MFA is enabled, your login process will include these steps:

  1. Enter your email address and password as usual
  2. Open your authenticator app on your phone
  3. Find the Mentorloop entry and note the 6-digit code
  4. Enter the code in the MFA field on the Mentorloop login screen
  5. Click Next to access your account

 

Time-Based Codes

Authentication codes expire after 30 seconds. If you enter a code and it doesn't work, wait for the next code to generate and try again. Make sure the time on your phone is synchronized correctly.

 

Removing MFA from your Account

If you need to remove MFA from your account (and your program doesn't require it), you can do so at any time.

Step 1: Access your account settings

Click on your profile picture in the top right corner of Mentorloop, then click Account under Account settings in the dropdown menu.

Step 2: Click Remove MFA

Click the button to disable Multi-Factor Authentication.

Step 3: Confirm removal

You'll be asked to enter both your password and a current MFA code to confirm the removal. This ensures only you can disable MFA on your account.

Note about program requirements

If your program requires MFA for all participants, you won't be able to remove it while you're enrolled. The remove button will be disabled. Contact your Program Coordinator if you have questions about this requirement.

Important: Re-adding MFA

If you remove MFA and then decide to add it back, you'll want to delete the old Mentorloop entry from your authenticator app before scanning the new QR code. The old codes will no longer work with your account.

 

Troubleshooting

My code isn't working during setup

Keep the setup screen open, and work through these in order:

  1. Check you're reading the right entry. The code must come from the Mentorloop entry you just added, not from a work, university, or other account in the same app. If you have more than one Mentorloop entry, the newest one is the right one.
  2. Wait for a fresh code. Wait for the code to change, type the new one, and click Enable once.
  3. Check the setup key. If you typed the key by hand, compare it with the key on screen, character by character. Copying and pasting it is more reliable.
  4. Start again, once. Only if two fresh codes in a row don't work: delete the Mentorloop entry from your app, refresh the Mentorloop page once, and repeat steps 3 and 4 under "How to set up MFA" above with the new QR code.

Don't sign out and back in to fix it. Signing out gives you a new QR code, so the entry you've already added stops working.

If it still doesn't work, email support@mentorloop.com. Let us know which device, browser, and authenticator app you're using.

My code isn't working when I sign in

  • Make sure you're using the code from the Mentorloop entry, not another account in the same app.
  • Wait for the code to change, then enter the new one.
  • Check that the date and time on your device are set automatically.
  • If you have more than one Mentorloop entry, try the newest one. Once you're signed in, delete the others.

I can't scan the QR code

You don't need to scan it. Use the setup key under the QR code instead, as described in Step 3. If you only have a computer, use one of the desktop options in Step 1.

My account is locked

Entering the wrong password three times locks your account for 15 minutes. Wrong MFA codes don't lock your account. Wait 15 minutes, then sign in again.

I got a new phone - what do I do?

Before disposing of your old phone, migrate your authenticator codes to your new device. Most authenticator apps have built-in migration features:

  • Google Authenticator: Use the Transfer Accounts feature in settings
  • Microsoft Authenticator: Use the backup and restore feature
  • Authy: Automatically syncs across devices when you sign in

If you've already lost access, email support@mentorloop.com to reset your MFA.

I lost access to my authenticator app

If you can no longer access your authenticator app and can't log in to Mentorloop, email the Mentorloop support team at support@mentorloop.com. They can reset your MFA so you can set it up again with a new QR code.

Can I use SMS for MFA codes?

Mentorloop MFA uses TOTP (Time-based One-Time Password) codes via authenticator apps only. SMS-based codes are not supported. Authenticator apps are more secure than SMS and work without cellular connectivity.

I'm re-adding MFA but my old codes still show in my app

When you remove and re-add MFA, you should delete the old Mentorloop entry from your authenticator app before scanning the new QR code. The old codes will no longer work with your account after MFA has been reset.

 

Best Practices

Security recommendations

  • Enable MFA as soon as possible - Don't wait until it's required.
  • Use a secure authenticator app - Choose reputable apps like Google Authenticator or Microsoft Authenticator.
  • Backup your codes - Some authenticator apps offer backup features. We recommend using them.
  • Keep your phone secure - Use a PIN, password, or biometric lock on your phone.
  • Plan ahead for phone changes - Migrate your authenticator codes before getting rid of your old device.
  • Use strong, unique passwords - MFA is most effective when combined with a strong password.

 

Need help?

If you encounter any issues setting up or using MFA, our support team is here to help. Email support@mentorloop.com.

Was this article helpful?

0 out of 0 found this helpful

Have more questions? Submit a request